The Process Of Tuckpointing in Melbourne and How to do It with Ease

Tuckpointing is an art that is really loved by people and it is also a long term solution for your building. When you get tuckpointing in Melbourne done for your building, it can last up to 40 years. This process of tuckpointing is not a tedious job as it seems to be.

What is Tuckpointing

Tuckpointing is basically a process where the mortar joints are filled of the brick walls which are exposed in your building. If you want to make sure that this process lasts longer than other processes then you should go with tuckpointing st. louis mo.

It’s very important to understand that tuckpointing should be done only by a trained professional. The reason being, it requires precision and experience along with an eye for detail. Tuckpointing is one of those things that can make a huge difference in improving the value of your property so you should find someone who can do it perfectly. Good thing is, finding a professional tuckpointing Melbourne is just as easy as getting a referral or performing a simple google search of “the best tuckpointing in Melbourne”.

What Is The Process?

Tuckpointing is a process wherein two different colors of mortar are used to create the impression of very fine joints between masonry units. The technique of using two different colors is called tuckpointing. The well-known process is the perfect way to restore the look and integrity of your brickwork. It is also an effective method to enhance the visual appeal and value of your property. Tuckpointing is essentially like a form of cosmetic surgery for your bricks and is also referred to as repointing, pointing or pointing up.

Typically, tuckpointing in Melbourne involves removing deteriorated mortar from existing joints and replacing it with new mortar. The joint profiles are made to match existing ones for a uniform appearance. It is important that you hire the right professionals to do this job because it can be complicated. Here’s how you can tuckpoint your buildings with ease:

The tuckpointing process involves three basic steps: cleaning, pointing and finishing.

Cleaning

The first stage of tuckpointing involves cleaning or clearing out any existing old mortar from joints in bricks using high-pressure water or compressed air. This step helps ensure that the new mortar adheres to the surface of the brick and grout joints effectively.

Pointing

After thoroughly cleaning out all the existing mortar, you can then replace it with a fresh layer of new mortar. This is achieved in one of two ways: by dry-joint pointing or wet pointing. Dry-joint pointing is usually preferred for filling in small gaps between bricks; this type of pointing does not use any water in the mix, thus reducing the chances of moisture penetration into the brickwork. Wet pointing is ideal for larger joints; this method uses wet mortar made with sand, lime and cement to fill in large gaps between bricks. Wet pointing may also involve repointing some parts of the brickwork to restore its structural integrity, while dry-joint pointing is best used when more aesthetic considerations take precedence over structural integrity restoration. A combination of both methods can be used if needed.

Finishing touches

The final step of tuckpointing is to add finishing touches like blending a few colored mortar mixes together to create a natural look and feel. This also helps strengthen the overall appearance of your brickwork for many years to come.